www.naked-pools.com
14
6. CONTROL PANEL OPERATION
BEFORE ENTERING CLOCK/TIMER YOU MUST BE IN THE DDS SCREEN.
Your NKD1 Fresh Water System comes with a built in digital timer.
C
LOCK /TIMER displays are all shown in 24 hour format.
I
t is important to understanding the difference between CLOCK and TIMER. CLOCK means the physical time of the
day (e.g. 08:00) and TIMER means the settings programmed to turn the unit ON and OFF.
T
o run the system in MANUAL ON and override internal timers leave settings as 00:00 on all ON/OFF times.
C
LOCK/TIMER can also be entered by pressing the [OK] button in MAIN MENU and scrolling to CLOCK/TIMER.
6.51 Clock Settings
CLOCK SETTING allows you to program the exact time of the day.
HH digits ash and pressing [+] increases the time and [-] decreases the time.
Pressing [OK] accepts the selected hour HH.
Pressing [<]
exits
you to the DDS screen.
MM digits ash and pressing [+] increases the time and [-] decreases the time.
Pressing [OK] accepts the selected minute MM.
Pressing [<] returns you to the previous display.
6.4 ION
6.5 CLOCK/TIMER
BEFORE ENTERING ION YOU MUST BE IN THE DDS SCREEN.
[ION] button automatically controls the IONISER output for your NKD1 Fresh Water
System.
The output is determined by the
volume of water
when your pool size is entered in
5
.4 Start Up
Information.
This feature is particularly handy if the copper levels are not holding at the correct levels
(0.2-0.4ppm) or when you want to run the pump for longer hours (i.e.
a variable speed pump on slow
setting
or you want additional ltration). If this is the case
ION
levels would be decreased.
P
ressing [+] or [-] increases or decreases in 1% increments.
I
ON can also be entered by pressing the [OK] button in MAIN MENU and scrolling to ION Setting.
