NAiS AFP3431, Руководство пользователя

Страница: 50 / 59

7.1 Setting mode to RUN
When you open the dialog box for RUN mode, the positioning unit switches RUN mode automatically.
( If you conducted a positioning operation in the previous section, perform software homing before proceeding
to RUN mode. )
There are the following 3 ways to open the dialog box for RUN mode.
■ Operation by using shortcut keys
Press [Ctrl] + [R] keys.
■ Operation from the toolbar
Click button on the toolbar.
■ Operation from the menu bar
Select [ Online ] Î [ RUN mode… ].
When this dialog box is activated, you can monitor the current value for each axis.
To exit monitoring, click [
Close
] and close this dialog box.
CAUTION
● When you close this dialog box, the positioning unit in it self remains RUN mode.
To change it to LOCAL mode, activate the dialog box for LOCAL mode. Then, it will be
changed to LOCAL mode automatically.
● While LOCAL mode has functions such as homing and a trial operation, RUN mode
performs actual operation only. Conduct enough operational check at LOCAL mode before
proceeding to RUN mode.
7-2