NAiS AFP3431, Руководство пользователя

Страница: 28 / 59

4.1 Setting parameters
By setting parameters, you can set a data range, an operating pattern of the homing function and an initial
operation of the positioning unit.
CAUTION
Check operation of set parameters fully.
There are the following 3 procedures to open the parameter setting dialog box.
■ Open parameter setting dialog box by using shortcut keys
Press [Ctrl] + [Q] keys.
■ Open parameter setting dialog box from the toolbar
Click button on the toolbar.
■ Open parameter setting dialog box from the menu bar
Select [ Option ] Î [ Parameter Settings… ].
Either of the following dialog boxes appears depending on a unit type that you chose in the unit selection dialog
box. ( There are some parts that cannot be set depending on number of axes. )
● E-type ● F-type
Contents of the settings are roughly divided into basic settings, detailed settings, homing function and interface
logic. To apply settings of each category, click an appropriate upper tab, or change pages by pressing [Ctrl] +
[PageUp] / [PageDown] keys.
4-2