English
User's Manual
of GLC001
Version 1, July 2023
- 13 -
ambient temperature 5
℃
and 40
℃
and an ambient humidity of
≤
80%, and the environment must be kept clean.
4.3 Fixed placement machine
Once the centrifuge is placed, do not move it at will. If it is moved, it should be
reconfirmed or the level should be adjusted, and the four support feet at the bottom of
the machine should be evenly supported on the table. Make sure that the support or
table on which the machine is placed is firm and can not shake or vibrate.
4.4 Connect the power supply correctly
A separate power socket shall be used for the power line of the centrifuge. This
power socket must be well grounded. Confirm that the power line used by the
centrifuge conforms to the safety specifications of the country and region where it is
located, and the power voltage and power frequency applicable to the centrifuge shall
conform to the requirements specified in this instruction or the specifications marked
on the centrifuge nameplate. Please use the attached power cord, correctly connect it
to the machine power socket, and firmly connect it to the network power supply.
When the power switch is closed
“︱”
，电源开关断开时为“
O
”
。
五
操作使用说明
5.1
控制面板及显示界面简介
Figure 4: schematic diagram of control panel
Figure 4. Introduction to control panel:
1. set selection key
2. volume control key
3. centrifugation time setting key
4. speed / relative centrifugal force setting key, switch key
