(Revised 4-9-2013) NT24k Managed Industrial Ethernet Switch User Manual & Installation Guide Page 89 of 132
SNMP - Configuration
The SNMP configuration tab allows SNMP to be disabled or enabled. The Read-Only, Read-Write, and
Trap Community Names are also shown here.
SNMP Mode:
Indicates whether SNMP is enabled or disabled.
Read-Only
Community Name:
This configurable field represents the Authorized Community Name for SNMP Get
requests. Only alphanumeric characters are allowed. The default is "public".
Read-Write
Community Name:
This configurable field represents the Authorized Community Name for SNMP Set
requests. Only alphanumeric characters are allowed. The default is "private".
Trap Community
Name;
This configurable field represents the Authorized Community Name for SNMP Traps.
Only alphanumeric characters are allowed. The default is "public".
SNMP Notification
Traps:
This allows for control of which SNMP traps will be sent by this switch. Each of the 4
available traps: Cold Start, Authentication, Warm Start and Link Status can be enabled
or disabled individually.
