(Revised 4-9-2013) NT24k Managed Industrial Ethernet Switch User Manual & Installation Guide Page 83 of 132
RSTP – Bridge
The Bridge tab under the RSTP category will display the RSTP information for the RSTP Root Bridge and
for the RSTP Bridge on this switch.
Notes:
1.
RSTP & N-Ring are different modes and cannot share links or segments. If a port is both an RSTP
port and an active N-Ring port, then the port will be disabled for RSTP.
2.
Do not create redundant links unless either RSTP or N-Ring is enabled.
3.
If a port is both a RSTP port and an enabled trunk group member, then the port will be disabled for
RSTP. The RSTP port status can be seen under advanced RSTP ports.
4.
It is recommended that RSTP rings consist of RSTP capable switches.
5.
RSTP is supported on only one VLAN.
