(Revised 4-9-2013) NT24k Managed Industrial Ethernet Switch User Manual & Installation Guide Page 16 of 132
SAFETY WARNINGS
GENERAL SAFETY WARNINGS
WARNING:
If the equipment is used in the manner not specified by N-Tron Corp., the protection
provided by the equipment may be impaired.
LASER SAFETY
(Option
s -
NTSFP-FX, NTSFP-FXE, NTSFP-SX, NTSFP-LX)
CAUTION:
CLASS 1 LASER PRODUCT. Do not stare into the laser!
Contact Information
N-Tron Corporation
3101 International Dr. Bldg. 6
Mobile, AL 36606-3010
TEL: (251) 342-2164
FAX: (251) 342-6353
WEBSITE:
www.n-tron.com
E-MAIL:
ENVIRONMENTAL SAFETY
WARNING:
The unit may become very hot to the touch in high temperature environments, so extreme
caution should be exercised in handling when energized. The unit should be disconnected from power and
allowed to cool for approximately 5 minutes before touching in high temperature applications.
ELECTRICAL SAFETY
WARNING:
Do not remove the top cover.
WARNING:
Do not operate the unit with the any cover removed.
WARNING:
Properly ground the unit before connecting anything else to the unit. Units not properly
grounded may result in a safety risk and could be hazardous and may void the warranty. See the grounding
technique section of this user manual for proper ways to ground the unit.