(Revised 4-9-2013) NT24k Managed Industrial Ethernet Switch User Manual & Installation Guide Page 63 of 132
N-Ring – Configuration – Advanced, Continued …
When the N-Ring mode is Manager, the Advanced Configuration page looks like this:
If N-Ring mode is Manager, the following advanced configuration data will be shown:
Self Health Packet
Interval:
The amount of time to wait in milliseconds before sending Self-Health packets. The
default is 10.
Maximum Missed
Packets:
The number of consecutive missed Self-Health packets that constitute a fault. The
default is 2.
Sign-On Delay:
The amount of time to wait in milliseconds before requesting initial sign-on
information from ring members. The default is 1000.
Sign-On Match
Packets:
The number of times the switch count must match before starting the sign-on
process. The default is 3.
Sign-On Interval:
The interval of time to wait in milliseconds before requesting subsequent sign-on
information from ring members when the ring is broken. The default is 3000.
Sign-On Info:
Spacing Multiplier:
The amount of time to wait in milliseconds, scaled by switch number, before
sending information to the ring manager. The default is 5.
Sign-On Info Retry
Timeout:
The amount of time the ring member will wait in milliseconds for the ring manager
to acknowledge receipt of the member's information before the member tries to re-
send the information. The default is 1500.
Delay Before Re-
Entering Broken
State:
The amount of time, in milliseconds, that must elapse before the ring is allowed to
go back into the broken state. The default is 3000.
