N.A.T. NAT-MCH Скачать руководство пользователя | Manualshive

Страница: 3 / 57

background image

NAT-MCH Clock-PCB – Technical Reference Manual

Version 1.4

© N.A.T. GmbH

3

Disclaimer

The following documentation, compiled by N.A.T. GmbH (henceforth called N.A.T.), repre-
sents the current status of the product’s development. The documentation is updated on a
regular basis. Any changes which might ensue, including those necessitated by updated speci-
fications, are considered in the latest version of this documentation. N.A.T. is under no obli-
gation to notify any person, organization, or institution of such changes or to make these
changes public in any other way.

We must caution you, that this publication could include technical inaccuracies or typographi-
cal errors.

N.A.T. offers no warranty, either expressed or implied, for the contents of this documentation
or for the product described therein, including but not limited to the warranties of merchant-
ability or the fitness of the product for any specific purpose.

In no event will N.A.T. be liable for any loss of data or for errors in data utilization or
processing resulting from the use of this product or the documentation. In particular, N.A.T.
will not be responsible for any direct or indirect damages (including lost profits, lost savings,
delays or interruptions in the flow of business activities, including but not limited to, special,
incidental, consequential, or other similar damages) arising out of the use of or inability to use
this product or the associated documentation, even if N.A.T. or any authorized N.A.T.
representative has been advised of the possibility of such damages.

The use of registered names, trademarks, etc. in this publication does not imply, even in the
absence of a specific statement, that such names are exempt from the relevant protective laws
and regulations (patent laws, trade mark laws, etc.) and therefore free for general use. In no
case does N.A.T. guarantee that the information given in this documentation is free of such
third-party rights.

Neither this documentation nor any part thereof may be copied, translated, or reduced to any
electronic medium or machine form without the prior written consent from N.A.T. GmbH.

This product (and the associated documentation) is governed by the N.A.T. General
Conditions and Terms of Delivery and Payment.

Note:

The release of the Hardware Manual is related
to a certain HW board revision given in the
document title. For HW revisions earlier than
the one given in the document title please
contact N.A.T. for the corresponding older
Hardware Manual release.

«
1
2
3
4
5
...
»

Содержание NAT-MCH


























































Отзывы:

Нет отзывов

Похожие инструкции для NAT-MCH

ACC-CX3RDK-CU5640

Бренд: e-con Systems Страницы: 9

Бренд: Idis Страницы: 31

NVIP- NVRA0104/GO

Бренд: Novus Страницы: 44

Бренд: A4Tech Страницы: 7

Бренд: Longshine Страницы: 27

Бренд: Cypress Semiconductor Страницы: 16

Бренд: Juniper Страницы: 7

PISO-725 Series

Бренд: ICP DAS USA Страницы: 8

Бренд: Advantech Страницы: 36

Бренд: Idis Страницы: 18

Бренд: TANDBERG Страницы: 2

POD-51EH-C541U-12

Бренд: IceTech Страницы: 8

Бренд: Intel Страницы: 154

Бренд: ADTRAN Страницы: 136

Бренд: audemat Страницы: 93

Бренд: XtendLan Страницы: 17

Бренд: Netopia Страницы: 138

BPN-SAS3-116A-N10

Бренд: Supermicro Страницы: 8

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды