24
25
12. Push the rod adapter
into the motor box until
it clicks in place (Fig.
2.15).
13. Continue to slide the
rod through the rest of
the barrels, and place
the rubber tubing
(H)
over both ends of the
rod (Fig. 2.16).
14. Turn the battery pack
(E)
switch to the
ON
position.
Fig. 2.15
Fig. 2.16
TILT ROD:
Ensure that the rod adapter can easily
slide over the entire tilt rod. Check for burrs or
deformities along the tilt rod, and, if necessary,
remove them with sand paper or a file.
NOTE
15. Rehang the blinds by
sliding them back into the
brackets and clipping the
brackets closed.
16. If your blinds use a tilt
wand, reconnect the tilt
wand to the hook on the
bottom of the manual
switch
(D)
.
SOLAR PANEL:
To finish installing the solar panel,
follow the instructions included with the solar
panel.
NOTE
CAUTION
BARRELS ALIGNED:
Make sure the barrels remain
aligned with each other while reinserting the tilt
rod (see Fig. 3 on page 36).
Fig. 2.17
