20
21
7. If you are installing a
MySmartBlinds solar
panel (sold separately),
connect the solar panel
cable to the black
connector on the motor
box’s left side (Fig. 2.9).
8. Pry open the headrail
gently, using your thumb
to push against the back
edge of the headrail and
your other fingers to
push against the front
edge. With the other
hand, insert the motor box
(A)
, with the motor box
bracket
(B)
attached, into the headrail (Fig. 2.10).
If your motor box and motor box bracket do not
fit inside the headrail using this method, try the
following:
a. Remove the motor box bracket
(B)
from the
motor box. Bend open the headrail gently,
and insert the bracket into the headrail.
Insert the motor box to the right of the
bracket into the headrail, and slide the
Fig. 2.10
Fig. 2.9
motor box into
the bracket until
it locks in place
(Fig. 2.11).
b. If your headrail
is exceptionally
shallow, you may
need to install the
motor box without
the motor bracket
in order for the
motor box to fit
inside the headrail.
NOTE
MOTOR BRACKET:
The motor bracket helps to
both keep the motor box in place and reduce the
motor’s noise level. Remove the motor bracket
only if the motor box will not fit inside of it in the
headrail.
Fig. 2.11