Mylex Mylex RAID EzAssist, Руководство пользователя

Страница: 74 / 290

How Do I Do a Custom Configuration?
2-26 RAID EzAssist User’s Manual
❑
Build Disk Arrays.
The first step in Custom Configuration is to build at least one disk array. This
is accomplished from the Disk Array Configuration screen (Figure 2-20).
Figure 2-20. Disk Array Configuration Screen
This screen uses the following navigation strategy:
• PgDn and PgUp show you all the available or selected drives if there is
a small down/up-arrow beside the Unused Drives or Disk Array fields.
• Inside Unused Drives, arrow keys select a drive, Enter accepts the
highlighted drive and adds it to the Disk Array box to the right.
• The Tab key shifts control to the buttons, or from the buttons back to
Unused Drives.
• When buttons are in focus, arrow keys select a button and Enter
activates the highlighted button.
m
Caution
The drives you select to comprise the array will all be
treated as having the capacity of the smallest selected
drive, regardless of the actual capacities. This could
lead to wasted drive space. Therefore, try whenever
possible to select drives of similar capacity when
building an array.