Controller Configuration
Manual No. 775029
3-7
❑
View/Modify StorageWorks(tm) Fault Management.
Default = Disabled
The StorageWorks Fault Management (TM) option monitors and reports
drive failures, background activity completion status, enclosure events, etc.
Enable this function only when Digital StorageWorks Fault Management
equipment (disk cabinet) is installed. In all other cases this option should
remain disabled.
,
WARNING
If you enable StorageWorks Fault Management,
make sure that Automatic Rebuild Management is
disabled.
☞
Use the arrow key to select the StorageWorks Fault
Management (TM) field, then...
☞
Press the + or - key to set the value to Enabled or Disabled as
desired,
OR
☞
Press Spacebar to display a box of available choices, use the
arrow key to select your desired setting, then press Enter.
❑
View/Modify Background Process Rate.
Default = 50
The Background Process Rate is a relative indication of how much time the
controller devotes to a rebuild, add capacity (MORE), or background
initialization operation. Integer values from 0-50 can be defined in multiples
of 10. For low priority and high array performance, specify a value of 0. For
high background process rate (with reduced array performance during),
select 50.
Содержание Mylex RAID EzAssist
