Mylex Mylex RAID EzAssist, Руководство пользователя

Страница: 73 / 290

Drive Configuration
Manual No. 775029 2-25
Figure 2-19. Custom Configuration Menu
The first option on the menu, “Configure a New Disk Array,” is used to build
new disk arrays, then optionally define logical drives from them.
If you want to add capacity to an existing disk array, see “How Do I Add
Capacity to an Existing Disk Array?” on page 2-37.
If you want to define logical drives on existing disk arrays, see “How Do I
Define Additional Logical Drives?” on page 2-51.
If you have any currently unconfigured drives that you want to assign as
spare drives, see “How Do I Assign Additional Spare Drives?” on page 2-59.
If you have any currently assigned spare drives that you want to unassign
(return to “Unconfigured” status), see “How Do I Unassign Existing Spare
Drives?” on page 2-65.
If you want to see whether spanning is turned on, OR if you want to enable
or disable spanning, see “How Do I Make Use of the Spanning Feature?” on
page 2-71.
☞
If you want to set up a new disk array, press Enter with the
Configure a New Disk Array option selected in the Custom
Configuration menu.