manualshive.com logo in svg

MYERSON EG-0100, Инструкция по эксплуатации

Поделиться
Скачать
MYERSON EG-0100 Скачать руководство пользователя страница 5

section 5 ~  

preventative maintenance & cleaning

Use only approved materials in the myerson 

HotShotElite

 handheld 

clasp injector. The use of materials other than those recommended by 
myerson may cause the device to fail and will void the manufactures 
warranty. 

See Section 15 for warranty information.

Keep melting chamber and sleeves free from dirt and other foreign 
debris to prolong the life of the device. Periodically clean the device 
with a damp rag and mild soap solution. 

Before cleaning, turn off 

device and unplug from electrical outlet.

After injection, remove rod then sleeve and let cool completely.
Separate the injection nozzle from injection sleeve and remove 
remaining material. Excess material should easily slide out of 
injection sleeve. If material remains, use a waxing spatula or 
similarly shaped instrument to push the material free. Any 
remaining residue should be removed prior to next use.  

Be careful not to damage either the interior or exterior threads 
when cleaning.

  

section 6 ~ service & repairs

For service and repair of the myerson 

HotShotElite

 handheld clasp 

injector, please call your myerson distributor, nearest myerson office  
or go to 

www.myersontooth.com

. 

Do not attempt to repair this 

device. Myerson, LLC is not responsible for damage to the device 
or any injuries associated with attempting to repair this device.

 

section 7 ~ declaration of conformity

We declare under our sole responsibility that this product is in confor-
mity with standards or standardization documents: EN61010-1:2001 
“Safety requirements for electrical equipment for measurement, control 
and laboratory use. Myerson is an ISO 13485 certified manufacturer.

section 8 ~ important safety warnings

When using the myerson 

HotShotElite

 handheld clasp injector, always 

follow basic safety precautions to reduce the risk of accidental injury 
due to burns or electrical shock.

Wear long sleeves, long pants, heat-resistant gloves, and safety goggles 
when using the device. Do not expose heat-resistant gloves to hot areas 
for extended periods of time.

Keep out of the reach of children. Do not place device where cord can 
be tripped over. Keep the device away from flammable material. It is 
normal for the device to become quite warm during use. Do not leave 
device unattended with the power on.

5

myerson HOTSHOTELITE MANUAL ENGLISH.indd   5

3/23/10   9:54:24 AM

Содержание EG-0100

























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды