manualshive.com logo in svg

MYERSON EG-0100, Инструкция по эксплуатации

Поделиться
Скачать
MYERSON EG-0100 Скачать руководство пользователя страница 20

section 14 ~ finishing & polishing

Myerson offers several products that make it quick and easy to finish 
and polish thermoplastic materials.

The 

Finishing Bur Kit 

includes all the necessary burs to trim and con-

tour a thermoplastic appliance.
 

•

  The diamond disc is used for removing the sprues and eliminating  

 

  flashing or other unwanted material.

 

•

  The #8 round bur is used when creating sprue holes as well as  

 

  any area where 2mm x 2mm is critical.

 

•

  The egg shaped burs work great for bulk reduction and fine tuning  

 

  of 

DurAcetal

 frameworks or 

DuraFlex

 partials.

 

•

  The reversed cone bur and diamond saucer bur can be used for  

 

  fine details the other burs can’t create.

The 

Polishing Kit

 was designed to decrease the time it takes get an

appliance ready for try in. Working from yellow to red to blue to green, 
the appliance will become increasingly smooth. Finish off the appliance 
with the rag wheel and a small amount of Fine Scratch Remover for that 
high shine. (See our current catalog for details, Item No. FN-0200)) 
                         

 

17. Finish and contour the clasp to the desired length and thickness

 

 

using the CDM Brand Finishing Bur Kit (not included in any

 

 

HotShoElite

 Kits)

 

18. See Section 14 for tips on finishing and polishing.

 

19. The finished appliance is now ready for try in.

20

AP-0224

 

myerson HOTSHOTELITE MANUAL ENGLISH.indd   20

3/23/10   9:55:04 AM

Содержание EG-0100

























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды