Page 20
3.9.
Ethernet Connection
There are two Ethernet ports available on both the
Transmitter and Receiver, allowing for connectivity of
Ethernet devices, and for their signal to be sent over the
UTP Link Port. Ethernet Port A supports PoE (PSE) and
can be used to power a PoE (PD) attached device (up to
5Watts).
Both Ethernet ports may be used for various application
purposes, including as a return channel to return edited
video originating from the Receiver side and being
displayed on the Transmitter side. The MuxLab 3G-
SDI/RS232 over IP Extender Kit (model: 500756) can
be used to return 3G-SDI video over these Ethernet
ports. See an example application diagram of this in
Figure 1.
6G-SDI Extender Over UTP with Ethernet
