Page 24
4.2.
USB Driver Setup
When interfacing a MuxLab device with the USB port
on Windows XP, Windows 7, 8 or 10 operating systems,
a driver setup file will be required. For Linux and Mac
OS X operating systems, no driver is necessary.
To install the USB serial driver, download the SC-
000032-A USB to serial driver file from the MuxLab
website and save it to the local hard drive. NOTE: If the
downloaded file is compressed, it will have to be
uncompressed before using it.
Plug the USB cable between the device and the PC, and
power up the device. The
Found New Hardware
wizard will open (Figure 5). Select
Locate and install
driver software (recommended)
.
Figure 5: Found New Hardware Wizard
6G-SDI Extender Over UTP with Ethernet