Page 23
7.
The behavior of the unit (Rx & Tx) should be as
follow during upgrade. The device uses the SDI
LEDs to indicate the actual status.
SDI A/B/C/D Blinking: Download phase.
Clear memory space and write new
image.
SDI A (only) Blinking: Erasing previous
programmable logic memory.
SDI B (only) Blinking: Copying
programmable logic from secondary
memory to primary memory.
SDI C (only) Blinking: Copying
firmware from secondary memory to
primary memory.
8.
After completion, the firmware will start and the
SDI A/B/C/D LEDs will cycle.
6G-SDI Extender Over UTP with Ethernet
