MUTOH VJ-1304, Быстрая справка

Страница: 13 / 114

VJ-1304 QUICK REFERENCE 1 Safety instructions
1-5
1 Safety
instructions
Do not slant the printer, prop it against a wall or turn it upside down.
There is a possibility that ink inside the printer may leak.
Moreover, normal operation after shifting (to these positions) cannot be guaranteed.
When taking this printer out of the package box, make sure to remove the vinyl sheet and hold the handles on the
side of the printer.
If the printer is lifted with the vinyl sheet attached, there is a possibility that the printer falls slipping from hands
and gets damaged.
While installing the stand, be sure to turn OFF the power and pull out the power plug.
It could lead to an electric shock.
When you do not use the printer for a long period, make sure to pull out the power plug from the power socket for
safety.
Make sure to connect an earth wire to the earth connection that meets the following standards.
• Earth terminal of power socket
• Earth wire with copper plate which is buried at 650 mm or more, deep in the ground.
Load roll media on an even surface such as a desk.
If you load roll media with the scroller standing vertical, there is a possibility that the scroller might get damaged.
Keep the work area well-ventilated.
This prevents fire, and stops operators from feeling sick from bad air.
When printing is finished, the media guide is at high temperature.
Wait until the media guide cools off.
Pay attention to the following points when you cut roll media.
Mishandling the razor blade may cause a cut on your finger or hand.
• When you hold media, do not place your finger on the media cut groove.
• Move the razor blade along the media cut groove.
When cleaning the printer, be sure to turn OFF the power and disconnect the power plug.
Move the printer maintaining a horizontal position.