MUTOH VJ-1304 Скачать руководство пользователя страница 63

Страница: 63 / 114

VJ-1304 QUICK REFERENCE

4 Daily maintenance

4-5

4 Daily

Maintenance

3. Take out the new ink cartridge from the bag.

NOTE

• Open the bag just before attaching the ink cartridge to the cartridge slot.

Leaving the ink cartridge with the bag open for a long time may result in abnormal printing.

• Use the ink cartridge within 2 years from the date printed on the package.

Using an ink cartridge after this period may affect print quality.

• Replace the ink cartridge six months after installing it in the printer.

• Do not insert or remove an ink cartridge more than 10 times.

If the ink cartridge is inserted or removed 10 times or more, it cannot be used even if there is
some remaining ink inside.

4. Attach the new ink cartridge.

5. Confirm that the operation panel returns to Normal.

NOTE

• If the ink cartridge is replaced during printing, printing resumes.

•

Ink cartridge replacement is complete.

Содержание VJ-1304



















































































































Результаты поиска

Содержание VJ-1304

Отзывы:

Похожие инструкции для VJ-1304

Бренды по названию

Популярные бренды

MUTOH VJ-1304, Быстрая справка

Результаты поиска

Содержание VJ-1304

Отзывы:

Похожие инструкции для VJ-1304

Бренды по названию

Популярные бренды