MUTOH VJ-1304, Быстрая справка

Страница: 51 / 114

VJ-1304 QUICK REFERENCE 3 Basic usage
3-25
3 Basic
usage
3.7.3.1 When the Media Cut menu is set to "Manual"
Follow the procedure below to cut roll media.
TIP
• For details of Media Cut menu, refer to the following manuals.
"5.1.10 Media Cut menu" in the Operation Manual
1. Feed the roll media to the media cut position after printing.
• "Manual Cut -> ENTER" is displayed on the operation panel.
2. Place a razor blade on the media cut groove on the media guide, and cut the roll media.
CAUTION
• Pay attention to the following points when you cut roll media.
Mishandling the razor blade may cause a cut on your finger or hand.
• When you hold media, do not place your finger on the media cut groove.
• Move the razor blade along the media cut groove.
• Cutting roll media is complete.
NOTE NOTE
• When loading the new roll media, cut the front edge of the media if it is not straight.
No. Name
1 Media guide
2 Media cut groove
3 Razor blade
2
1
3