MUTOH VJ-1304, Быстрая справка

Страница: 95 / 114

VJ-1304 QUICK REFERENCE 5 Troubleshooting
5-17
5 Troubleshooting
(5) The media veers during printing
5.3.4 Printing-related troubleshooting
(1) Printing is partially stained or incomplete
NOTE NOTE
• Proper print quality may not be obtained with the media other than the recommended one.
(2) The printing position is incorrect (some parts of the media cannot be printed
on)
No. Possible cause Remedy Reference
1 Are you using the recommended media? Use the recommended media.
"4.2.1 Media
type" in the Operation
Manual
2 Is the loading position of the media correct? Set the media correctly.
3.5.2 Setting roll
media
3 Is the scroller set correctly? Set the scroller correctly.
3.5.1 Loading
roll media
No. Possible cause Remedy Reference
1 Does the media include moisture? Replace it with new media.
"6.1.2 Replacing
roll media" in the
Operation Manual
2 Are you using the folded or wrinkled media?
3 Does the media bend? Use the recommended media.
When using media other than the dedicated
one, set the Vacuum Fan menu.
"4.2.1 Media
type" in the Operation
Manual
"5 Panel setup
menu" in the
Operation Manual
No. Possible cause Remedy Reference
1 Is the loading position of the media correct? Set the media correctly.
3.5.2 Setting roll
media
2 Did you set up the origin and print position? Cancel or reset the settings of the origin and
print position.
"5 Panel setup
menu" in the
Operation Manual