MUTOH VJ-1304, Быстрая справка

Страница: 94 / 114

5 Troubleshooting VJ-1304 QUICK REFERENCE
5-16
(3) The wrong media size is set during initialization
(4) Media jams frequently occur
NOTE NOTE
• If media other than the recommended one is used, correct media feeding cannot be assured.
6 Are you using folded, torn or rolled media? Replace the media.
"4.2.2 Cautions
on handling media" in
the Operation Manual
No. Possible cause Remedy Reference
1 Are you using the recommended media? Use the recommended media.
"4.2.1 Media
type" in the Operation
Manual
2 Is the media loaded at an angle? Set the media straight.
3.5.2 Setting roll
media
3 When the media is set, does it curl upward? Straighten the media or set a new media.
3.5.2 Setting roll
media
4 Is the printer used in an environment other
than the one specified, such as near an air
conditioner? Only use the printer in an environment that is
specified for use.
3.5.1 Loading
roll media
5 Are you using media that has been printed on
already? Use a new media.
"4.2.1 Media
type" in the Operation
Manual
No. Possible cause Remedy Reference
1 Are you using the recommended media? Use the recommended media.
"4.2.1 Media
type" in the Operation
Manual
2 Is the media used in an environment other than
the one specified? Use the media in a dedicated environment.
"4.2.2 Cautions
on handling media" in
the Operation Manual
3 Are you using the old media? Replace it with new media.
"6.1.2 Replacing
roll media" in the
Operation Manual
4 Are you using the folded or wrinkled media?
5 Does the media bend? Use the recommended media.
When using media other than the dedicated
one, set the Vacuum Fan menu.
"4.2.1 Media
type" in the Operation
Manual
"5 Panel setup
menu" in the
Operation Manual
No. Possible cause Remedy Reference