MUTOH valuejet 1614 страница 86 Скачать руководство пользователя

Страница: 86 / 125

Users Guide ValueJet 1614

AP-75790 Rev 1.4 -22/02/2011,

4.7.19

CR Maintenance menu

Setup Item

Setting Value

Description

CR Maintenance

Start

Clean the wiper.

[Enter] key:
The print head moves to the centre.
The wiper moves forward.

End

Cleaning the wiper is complete.

[Enter] key:
Print head returns to the original position.
The wiper returns to the original position.

[Cancel] key: Shift to the previous hierarchy without the wiper
cleaning operation.

Refer to: Setup menu

4.7.20

Initialization menu

The setting value of the printer is returned to default.

Setup Item

Setting Value

Description

Initialization

ALL

All settings return to factory default.

MediaType

The settings of the MediaType menu are returned to factory default.

Except MediaType

The settings other than the MediaType menu are returned to factory
default.

[Enter] key:
Display "Initialling" on the operation panel, and initialize the setting.
[Cancel] key: Shift to the previous hierarchy without initialization.

Refer to: Setup menu

4.7.21

Life Times menu

Setup Item

Setting Value

Description

Life Times

Head

Display the operational life of each part.

The operational life of a part is indicated by five asterisks (100 %).

As the part deteriorates, the number of asterisks decreases one by
one (20 %).

The part should be changed when all of the asterisks have
disappeared, and "Change" is displayed.

Pump

CR Motor

PF Motor

[Cancel] key: Shift to the previous hierarchy.

Refer to: Setup menu

Notes

Do not keep using a part which has reached its life span. Problems caused by doing so will not be
covered by the warranty.

All manuals and user guides at all-guides.com

all-guides.com

Содержание valuejet 1614






























































































































Результаты поиска

Содержание valuejet 1614

Отзывы:

Похожие инструкции для valuejet 1614

Бренды по названию

Популярные бренды

MUTOH valuejet 1614, Руководство пользователя

Результаты поиска

Содержание valuejet 1614

Отзывы:

Похожие инструкции для valuejet 1614

Бренды по названию

Популярные бренды