Thermal Liner
Immersion Module
Thermal Liner
Wrist Zipper
Immersion Module
Wrist Zipper
FIGURE 8
Thermal Liner and the Immersion Module
Connected at the Wrist
Thermal Liner
Neck Zipper
Immersion
Module
Neck Zipper
Immersion
Module
Neck Seal
Folded Back
FIGURE 9
Connecting the Thermal Liner and the
Immersion Module at the Neck
Immersion
Module
Thermal
Liner
FIGURE 6
Insertion of the Thermal Liner Into the
Arm of the Immersion Module
Immersion Module
Waterproof Zipper
Immersion
Module Upper
Interconnection
Zipper
Immersion
Module Lower
Interconnection
Zipper
Thermal Liner Upper
Interconnection Zipper
Thermal Liner Lower
Interconnection Zipper
FIGURE 7
Closing the Lower Interconnection Zipper
3
STEP
4 Waist and waterproof zipper connection - Part I
a) Return the immersion module to its laid out position in Step 1. Push the left arm
of the thermal liner down to the end of the left arm of the immersion module
(see fig. 6).
b) Repeat this procedure with the right arm.
c) To join these layers together, start at the end of the waterproof zipper
underneath the left arm and close the length of the lower interconnection zipper
(see fig. 7).
d) Fold the two layers out and lay them flat.
STEP
5 Wrist connection
a) Push your hand between the two layers down the left arm, grab the arms at the
interconnection zippers and pull both arms through.
b) Line up the zipper on the immersion module with the zipper on the cuff of the
thermal liner and connect them (see fig. 8).
c) Push the cuffs back through the arm to the normal position.
d) Repeat this procedure for the right arm.
Note:
Ensure the arms do not twist, maintaining a matching orientation
during insertion.
