d) Pass the suspender strap through the front and back pass-through slots on the
Thermal Liner. While keeping the strap straight, attach the non-adjusting end of
a suspender to the suit’s back attachment point (Fig. 21). Should be similar to
Step c.
FIGURE 21
e) Repeat these steps to attach the other suspender. It is recommended to use two
suspenders for even support.
f) The suspenders may be attached so they are crossed over the user’s back.
g) Use the suspender strap ends to adjust for a secure comfortable fit.
FIGURE 22
TRIM TO FIT WRIST SEAL INSTRUCTIONS
Your suit comes equipped with universal-sized wrist seals that have a tapered sealing
surface at the end of the cuff. This tapered end allows you to modify the size of the
cuff opening to match the physical characteristics of your hand and wrist. Trimming the
end of the cuff increases the diameter of the end opening, allowing a larger wrist to be
inserted and sealed comfortably without damaging the cuff. Users with unusually boney
16
