Immersion Module
Thermal Liner
Immersion
Module
Ankle Zipper
Thermal Liner
Ankle Zipper
FIGURE 5
Thermal Liner and the Immersion Module
Connected at the Ankles
2
STEP
2 Connect the thermal liner and the immersion module at the ankle
a) Fold the top half of the immersion module over at the waist toward the legs.
Ensure the lower portion of the module is exposed.
b) Keeping the bottom flat and straight, use an overhand grasp to insert each leg
of the thermal liner down into each leg of the immersion module until it reaches
the interconnection zipper at the ankle (see fig. 3).
Note:
Ensure the legs do not twist, maintaining a matching orientation
during insertion.
c) After pushing your hand down between the thermal liner and the immersion
module, grab the thermal liner ankle zipper and the immersion module zipper.
d) Pull both legs out together, turning them inside out to expose the zippers (see fig. 4).
e) Attach the two ankle zippers. The immersion module zipper will only work in one
direction (see fig. 5). Apply the same procedure to the other leg.
f) Push the two legs completely down into the immersion module ensuring they are
aligned.
Thermal
Liner
Immersion
Module
Thermal Liner
Ankle Zipper
Immersion
Module
Ankle Zipper
FIGURE 4
Pulling a Leg Out Exposing the Zipper
S
TEP
3 Suspenders (MA7650)
See Suspenders section (p. 15) for detailed instructions for suspender attachment.
