c) Line up the two ends of the top interconnection zipper on the immersion module
with the corresponding zipper of the outer shell. Connect the two ends and
fasten them the length of the zipper.
d) Lay the suit out flat.
STEP
10 Outer shell wrist connection
a) Fold back the left wrist of the outer shell exposing the interconnection zipper.
b) Line up the zipper with the neoprene wrist zipper and connect the two securely
(see fig. 12).
c) Fold the wrist of the outer shell back over to cover the interconnection zipper.
d) Repeat this procedure for the right wrist.
WARNING
THE MSD901 SHOULD BE WORN WITH ALL THREE MODULES ASSEMBLED. THE MODULES
ARE NOT DESIGNED TO BE WORN INDEPENDENTLY, AND A LOSS OF PROTECTION AND
WEAR RESISTANCE WILL RESULT IF WORN IMPROPERLY.
6
5
Immersion Module
Wrist Zipper
Outer Shell
Wrist Zipper
Outer Shell Cuff
Folded Back
FIGURE 12
Connecting the Immersion Module
and the Outer Shell at the Wrist
