c) Immersion module may be tumble-dried on a low heat setting.
d) Zipper cleaning is the first step to zipper longevity. Clean the zipper of any mud,
sand, salt or foreign elements. First, use warm soapy water to remove any heavy
deposits and then use one of the recommended cleaning fluids listed in the chart
below. Finally, apply a recommended wax for easy zipper movement. A daily use
suit requires the application of wax to the waterproof zipper once per week.
CLEANING FLUID
LUBRICATING WAX
Product Name
Supplier
Product Name
Supplier
Zippy Cool
YKK USA
Zippy Cool
YKK USA
Zip Care
McNett
Zip Wax
McNett
BDM Fluid
BDM UK
BDM Wax
BDM UK
4. Thermal liner
a) Wash by hand in warm water using a mild powdered soap.
b) Rinse thoroughly in clean water.
c) Hang to air dry.
Note:
Ensure that the outer shell, immersion module and thermal liner
are completely dry before reassembling.
Inspection
General Suit Examination
Periodically examine your MSD901 for visual signs of abrasion or damage. Lay the suit
out on a clean, flat surface. Make sure that the suit is dry inside and out. Visually check
for small rips, tears, or punctures that can be repaired by a suitable repair station*. Major
rips, tears, or punctures should be referred to Mustang Survival for inspection and repair.
* Contact Mustang Survival Corp. for more information.
Inspection Intervals
The suit should be inspected:
a) On receipt from the supply depot or contractor.
b) Periodic inspections; depending on the environmental conditions of usage, not to
exceed 90 days unless in storage.
c) Before and after use by the individual issued the suit.
13
