6
PUTTING IT ON
(DONNING)
It is important that your flotation device fits properly. Incorrect fit or
improper fastening of attachments could impede its effectiveness.
1. Put the flotation device on just like a vest (Fig. 2), with the fabric
panels in the front, and fasten the front buckle.
2. Adjust the waist belt using its side buckle, and secure the belt’s
loose end with the belt loop. All belts and straps are already
threaded correctly and only need to be adjusted for fit. The belt
should sit below your rib cage, tightened to fit snugly.
FIGURE 2
3. Check the fit by pinching the belt strap, just as you would a
waistband. If you can pinch the material together, tighten your
flotation device.
Wear it on the outside and intact!
Always wear inflatable flotation devices over clothing (as the
outermost layer) to avoid restricted inflation, which could cause
personal injury and/or damage to your device.
Do not tie or sew anything to the outside of (or around) your flotation
device, as it may compromise your device’s ability to inflate.
TAKING IT OFF
(DOFFING)
1. If your flotation device has been inflated, partially deflate it while
still wearing it to make doffing easier.
2. Loosen your waist belt and unfasten the front buckle.
3. Slip your arms out of the straps.
DONNING
