Contents
Connection and Analogue
Channel Setup
Fault fi
nding
guide
Information and
specifi
cations
Digital TV Operation
Connection to other
equipment
12
Other convenience functions
You can change the default settings to convenience use.
Icon
Selected Items
Setup hint
PICTURE
PREFERENCE
SPORTS
Bright and dynamic picture (factory-set)
STANDARD
Standard picture quality (factory-set)
MOVIE
Movie-like picture setting (factory-set)
MEMORY
Your personal preferences
BRIGHTNESS / CONTRAST
/ COLOUR / TINT (NTSC)/
SHARPNESS
You can adjust the picture to your preference.
The “TINT (NTSC)” option can be selected if an NTSC 3.58MHz or NTSC
4.43MHz signal is input through one of the AV sockets, and NTSC or AUTO
has been selected for the AV COLOUR option.
DNR *
1
OFF / LOW /
MEDIUM /
HIGH
Sometimes it is not possible to input a high-quality HD signal. The actual signal
input is too small and noisy, e.g. a video fi lm in letterbox format, or a noisy
analogue cable TV signal. DNR can slightly reduce interferences caused by the
faulty input signal.
COLOUR TEMPERATURE
Bluish (COOL) / Neutral (MEDIUM) / Reddish (WARM)
BLUE BACK
ON / OFF
You can set the TV to automatically change to a blue screen and mute the
sound if the signal is weak or absent.
BACKLIGHT
You can use the Back light feature to adjust the screen brightness for improved
picture clarity.
RESET
Select “RESET” to reset PICTURE PREFERENCE, BRIGHTNESS, CONTRAST,
COLOUR, TINT(NTSC), SHARPNESS, COLOUR TEMPERATURE and
BACKLIGHT to the factory preset values.
NICAM
See page 10.
BASS / TREBLE / BALANCE
You can adjust the sound quality to your preference.
SURROUND
ON / OFF
The SURROUND feature processes the audio signal to expand the listening fi eld
wider and deeper to create a “pseudo surround-sound” from the TV’s speakers.
The feature works with stereo signals from TV broadcast or AV input.
SPEAKERS *
2
ON / OFF
Use this feature to turn the TV speakers off when you connect an audio system
(see page 27).
HDMI1 AUDIO
See page 25.
RESET
Select “RESET” to reset BASS, TREBLE and BALANCE to the factory preset values.
AUTO TUNING
See page 6.
MANUAL TUNING
See page 7.
CH ALLOCATION
See page 6.
LANGUAGE
See page 5.
VERTICAL POSITION
When the CINEMA mode is selected (see page 11), you can adjust the
vertical picture position. Press
B
or
A
to adjust the vertical position of the
picture by up to +10 and downwards by up to –10.
AUTO 4:3
DEFAULT *
3
4:3 / 16:9
This option selects the default way that a 4:3 signal is shown - either as normal
“4:3” or expanded in the “16:9” mode, according to your preferences.
SLEEP TIMER
0~120 min
(every 10 minutes)
You can set SLEEP TIMER to automatically turn off the TV.
To cancel the SLEEP TIMER, set to “0”.
AV1 INPUT
See page 28.
AV2 INPUT
See page 28.
AV COLOUR
See page 28.
REC SCREEN
STATUS
ON / OFF
This function is used in conjunction with the Timer function that is included as
part of the Digital EPG. It determines whether the TV screen switches on or not
when a programmed Timer setting begins - see page 23 for further details.
RESET TV SETTING
Prees
ENTER
to enter the RESET TV SETTING screen.
Prees
C
or
D
to select “YES”, then prees
ENTER
.
Reset the TV function will now begin, and this unit will automatically turn off.
Note:
*
1
In HDMI or COMPONENT (except 480i/576i) mode, the DNR option cannot be selected.
*
1
The interferences from the input are suppressed most if HIGH is set. This could result in side-effects such as
loss of sharpness and smearing.
*
2
Make sure the volume control of your audio amplifi er is set to a moderate listening level.
*
3
AUTO 4:3 DEFAULT is available only for AUTO picture size setting.
*
3
In COMPONENT and HDMI mode, AUTO 4:3 DEFAULT is available only for 480i/576i mode.
Basic TV features
35Q0901A.indd Sec1:12
35Q0901A.indd Sec1:12
4/10/08 2:30:52 PM
4/10/08 2:30:52 PM
