Contents
Connection and Analogue
Channel Setup
Basic TV features
Information and
specifi
cations
Digital TV Operation
Connection to other
equipment
30
Symptom
Cause
Solution
Remote control does not work or
operates erratically.
Weak or exhausted batteries.
Replace the batteries.
Batteries placed in the wrong way.
Check that you have put the
batteries in the remote control the
right way around.
Unable to playback video tapes.
During automatic tuning your VCR
was not switched on.
Before starting the automatic
tuning make sure that your TV is
switched on and that a tape is
playing.
Unable to watch satellite stations.
During automatic tuning your
Satellite/Cable box was not
switched on.
Before starting the automatic
tuning make sure that your
Satellite/Cable box is switched
on and that a channel has been
selected for example BBC News
24.
While viewing a DVB (digital)
channel, there is sound but no
picture.
Received channel has audio
content only.
Some channel offers audio content
only. It is normal.
Blocky image or image stops
intermittently.
Digital signal strength is low.
Check all aerial connections.
Move the aerial away from areas
of possible interference.
Try using an aerial booster.
Some digital channels cannot be
viewed.
Some channels are encrypted and
are only available via subscription.
Contact the service provider to
subscribe.
“Database empty” message
appears on the screen.
The auto tuning process has not
been successful.
Check all aerial connections
and try auto tuning again.
No sound when connecting to
external source via HDMI to HDMI
lead.
HDMI input mode is set to wrong
option.
Set the input mode for the relevant
HDMI socket to HDMI.
No sound when connecting to
external source via HDMI to DVI
lead.
HDMI input mode is set to wrong
option.
Set the input mode for the relevant
HDMI socket to HDMI.
Audio leads have not be
connected.
Ensure that seperate audio leads
are connected to the relevant
audio input socket.
The LCD panel is a very high technology product, giving you fi ne picture details. Occasionally, a few
nonactive pixels may appear on the screen as a fi xed point of blue, green or red. Please note that this does
not affect the performance of your product.
•
Fault fi nding guide
Fault fi
nding
guide
35Q0901A.indd Sec1:30
35Q0901A.indd Sec1:30
4/10/08 2:31:01 PM
4/10/08 2:31:01 PM
