Contents
Basic TV features
Fault fi
nding
guide
Information and specifi
cations
Digital TV Operation
Connection to other
equipment
5
Quick guide for ANALOG MENU operation/Selecting
the video input source/On-screen Language Selection
Make sure the aerial
connection and power
supply are connected as
per the description on
previous page.
Preparations:
Turn on the unit with the
(Power) button on the
unit. The (On/Timer/
Standby) indicator will
light up in green.
To change the unit to
standby mode, press
on the remote control.
(On/Timer/Standby)
indicator will change
from green to red. To turn
on the unit from standby
mode, press on the
remote control again.
In standby mode, you can
also turn the unit on with
(Channel) /
on
the unit or
P + / –
on the
remote control.
To turn off the unit press
(Power) button on the
unit - to completely switch
it off, disconnect the mains
power supply.
Quick guide for ANALOG MENU operation
Call ANALOG MENU and for example: Select AUTO TUNING.
1
Press
INPUT SELECT
.
Select ATV. Press
ANALOG MENU
.
2
AUTO TUNING
MANUAL TUNING
CH ALLOCATION
LANGUAGE
ENGLISH
VERTICAL POSITION
0
AUTO 4:3 DEFAULT
16:9
Press
B
or
A
to select
.
3
AUTO TUNING
MANUAL TUNING
CH ALLOCATION
LANGUAGE
ENGLISH
VERTICAL POSITION
0
AUTO 4:3 DEFAULT
16:9
Press
C
or
D
to select AUTO TUNING, then press
ENTER
to enter the AUTO TUNING menu.
... on the following pages the menu can be called in the
same way as here.
4
Press
EXIT
to return to the normal screen.
Selecting the video input source
Press
INPUT SELECT
to view a signal from another
device connected to your TV, such as a VCR or DVD
player. You can select each input source depending on
which input jacks you used to connect your devices.
To select the video input source, press
C
/
D
. Then press
ENTER
within 6 seconds.
ATV
DTV
AV1
AV2
AV3
COMPONENT
INPUT SELECT
On-screen Language Selection
1
ENGLISH
AUTO TUNING
MANUAL TUNING
CH ALLOCATION
LANGUAGE
ENGLISH
VERTICAL POSITION
0
AUTO 4:3 DEFAULT
16:9
Select LANGUAGE (unless you have already selected
when the set was fi rst switched on).
Then press
ENTER
.
2
Press
B
or
A
to select the desired language.
3
Press
EXIT
to return to the normal screen.
Note:
If no buttons are
pressed for more than
approx. 60 seconds,
the menu disappears
automatically.
•
Connection and Analogue
Channel Setup
35Q0901A.indd Sec1:5
35Q0901A.indd Sec1:5
4/10/08 2:30:47 PM
4/10/08 2:30:47 PM
