26 _
Getting Started
Configuring network protocol via the machine
You can set up TCP/IP network parameters, follow the steps listed below.
1.
Make sure your machine is connected to the network with an RJ-45
Ethernet cable.
2.
Make sure you have turned on the machine.
3.
Press
Machine Setup
on the control panel.
4.
Press
Admin Setting
.
5.
When the login message appears, enter password. Touch the password
input area, then the question marks appears. Use the number keypad on
the control panel to enter the password. Once the password is entered,
press
OK
. (Factory setting:1111)
6.
Press the
Setup
tab >
Network Setup
.
7.
Select
TCP/IP Protocol
.
•
Apple Talk Protocol:
This protocol is widely used in Macintosh
network environments.
•
Ethernet Speed:
You can select the communication speed for
Ethernet connections.
8.
Press
IP Setting
.
9.
Select
Static
and then enter
IP Address
,
Subnet Mask
and
Gateway
address fields. Touch the input area then, enter addresses by number
keypad on the control panel.
10.
Press
OK
.
SYSTEM REQUIREMENTS
Before you begin, ensure that your system meets the following
requirements:
Windows
Macintosh
Contact the network administrator if you are not sure how to configure.
You can also set up the network settings through the network
administration programs.
•
SyncThru™ Web Admin Service
: Web-based printer
management solution for network administrators.
SyncThru™
Web Admin Service
provides you with an efficient way of
•
SyncThru™ Web Service
: Web server embedded on your
network print server, which allows you to:
- Configure the network parameters necessary for the machine to
connect to various network environments.
- Customize machine settings.
- Customize email settings and set up address book for scanning
to email.
- Customize server settings and set up address book for scanning
to the FTP or SMB servers.
- Customize printer, copy, and fax settings
•
SetIP
: Utility program allowing you to select a network interface
and manually configure the IP addresses for use with the TCP/IP
protocol. See "Using the SetIP program" on page 29.
OS
REQUIREMENT (RECOMMENDED)
CPU
RAM
FREE HDD
SPACE
Windows 2000
Pentium II 400 MHz
(Pentium III 933 MHz)
64 MB
(128 MB)
600 MB
Windows XP
Pentium III 933 MHz
(Pentium IV 1 GHz)
128 MB
(256 MB)
1.5 GB
Windows 2003
Server
Pentium III 933 MHz
(Pentium IV 1 GHz)
128 MB
(512 MB)
1.25 GB to 2 GB
Windows
Vista
Pentium IV 3 GHz
512 MB
(1024 MB)
15 GB
Windows
Server 2008
Pentium IV 1 GHz
(Pentium IV 2 GHz)
512 MB
(2048 MB)
10 GB
•
Internet Explorer 5.0 or higher is the minimum requirement for all
Windows operating systems.
•
Users who have an administrator right can install the software.
•
Windows Terminal Services
is compatable with this machine.
OPERATIN
G SYSTEM
REQUIREMENT (RECOMMENDED)
CUP
RAM
FREE HDD
SPACE
Mac OS X
10.4 or lower
•
PowerPC G4/
G5
•
Intel
processors
•
128 MB for a
PowerPC based
MAC (512 MB)
•
512 MB for an
Intel based MAC
(1 GB)
1 GB
Mac OS X
10.5
•
867 MHz or
faster
PowerPC G4/
G5
•
Intel
processors
512 MB (1 GB)
1 GB
Содержание M F X - 5 5 5 5
Страница 12: ...11...