Murata DNT24 Series, Руководство по интеграции

Страница: 67 / 84

Returning to the I/O Tools tab, the multi-tab Configuration window for each radio can be accessed by clicking on its Config
button. The data presented on the first six tabs corresponds to configuration register Banks 0 through 5 as discussed in
Section 4.2 above, with the data on the next two tabs corresponding to configuration register Bank 6.
Figure 8.6.1.2
The
Transceiver Setup Tab is shown in Figure 8.6.1.2 and corresponds to Bank 0. The current values of each Bank 0
parameter are displayed and can be updated by selecting from the drop-down menus or entering data from the keyboard,
and then pressing the
Apply Changes button. Note that data is displayed and entered in Big-Endian order . The utility
program automatically reorders multi-byte data to and from Little-Endian order when building or interpreting messages.
Figure 8.6.1.3
©2009-2014 by Murata Electronics N.A., Inc.
DNT24 Integration Guide R2.0 - 10/27/14
www.murata.com