Murata DNT24 Series Скачать руководство пользователя | Manualshive

Страница: 33 / 84

background image

6.8 Labeling and Notices

DNT24 FCC Certification - The DNT24 hardware has been certified for operation under FCC Part 15 Rules, Section
15.247.

The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from

all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.

DNT24 FCC Notices and Labels -

This device complies with Part 15 of the FCC rules. Operation is subject to the following

two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference re-
ceived, including interference that may cause undesired operation.

A clearly visible label is required on the outside of the user’s (OEM) enclosure stating the following text:

Contains FCC ID: HSW-DNT24
Contains IC: 4492A-DNT24

MURATA (Insert Model Designation DNT24C, DNT24CA, DNT24P or DNT24PA depending on the model used): This de-
vice complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any interference received, including interference that may
cause undesired operation.

WARNING: This device operates under Part 15 of the FCC rules. Any modification to this device, not
expressly authorized by Murata Electronics N.A., Inc., may void the user’s authority to operate this device.

This apparatus complies with Health Canada’s Safety Code 6 / IC RSS 210.

IC RSS-210 Notice -

Operation is subject to the following two conditions: (1) this device may not cause interference, and

(2) this device must accept any interference, including interference that may cause undesired operation of the device.

ICES-003

This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus as set out in the
radio interference regulations of Industry Canada.

Le present appareil numerique n’emet pas de bruits radioelectriques depassant les limites applicables aux appareils nu-
meriques de Classe B prescrites dans le reglement sur le brouillage radioelectrique edicte par Industrie Canada.

©2009-2014 by Murata Electronics N.A., Inc.
DNT24 Integration Guide R2.0 - 10/27/14

www.murata.com

«
...
31
32
33
34
35
...
»

Содержание DNT24 Series





















































































Отзывы:

Нет отзывов

Похожие инструкции для DNT24 Series

Бренд: ICS Страницы: 5

Бренд: RadioLink Страницы: 4

Бренд: Radio Industries Страницы: 26

Бренд: Yaesu Страницы: 80

Бренд: Xblitz Страницы: 76

Бренд: Vaisala Страницы: 101

Бренд: Zenith Страницы: 70

Бренд: Crypto Страницы: 26

DS-PM1-I16O2-WA

Бренд: HIKVISION Страницы: 2

Бренд: MultiDyne Страницы: 8

eBridge PLUS eBridge8PCRM

Бренд: Altronix Страницы: 8

Бренд: Topfield Страницы: 54

Бренд: Magtech Страницы: 35

Бренд: Avanti Страницы: 24

Бренд: Philips Страницы: 2

PUV-3150TR-UEAO

Бренд: CYP Страницы: 24

Бренд: NEC Страницы: 110

Бренд: Antsig Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды