erating in differential mode, the ADC1 to ADC0 differential reading is stored in the ADC0 position, and the ADC2 to ADC0
differential reading is stored in the ADC1 position. The ADC2 reading is not used in ADC differential mode and this posi-
tion is set to 0.
Gpio0 through Gpio5
- if a pin is configured as an output, writing to its corresponding parameter to sets the pin’s logic
state. If a pin is configured as an input, writing to its corresponding parameter enables or disables the pin’s internal pull-up.
Reading these registers returns the current level detected on the corresponding pins.
Adc0 through Adc2
- read-only parameters that return the current reading for the selected ADC channel (Little-Endian
byte order). When the ADC is operating in differential mode, the ADC1 to ADC0 differential reading is stored in the ADC0
position, and the ADC2 to ADC0 differential reading is stored in the ADC1 position. The ADC2 reading is not used in ADC
differential mode and this position is set to 0. Also, see the discussion of the
AdcSampleIntvl
parameter below.
EventFlags
- used with the automatic I/O reporting feature, this parameter indicates which I/O events have been triggered
since the last report (write 0x0000 to reset):
bits 15..8
Reserved
bit 7
ADC2 high/low threshold excursion
bit 6
ADC1 high/low threshold excursion
bit 5
ADC0 high/low threshold excursion
bit 4
Periodic timer report
bit 2
GPIO2 edge transition
bit 1
GPIO1 edge transition
bit 0
GPIO0 edge transition
Dac0 through Dac1
- sets the DAC outputs. The range of this parameter is 0x0000 to 0x0FFF.
©2009-2014 by Murata Electronics N.A., Inc.
DNT24 Integration Guide R2.0 - 10/27/14
www.murata.com
Содержание DNT24 Series
Страница 79: ...Figure 10 3 2 2009 2014 by Murata Electronics N A Inc DNT24 Integration Guide R2 0 10 27 14 www murata com...
Страница 80: ...Figure 10 3 3 2009 2014 by Murata Electronics N A Inc DNT24 Integration Guide R2 0 10 27 14 www murata com...
Страница 82: ...2009 2014 by Murata Electronics N A Inc DNT24 Integration Guide R2 0 10 27 14 www murata com...
Страница 83: ...2009 2014 by Murata Electronics N A Inc DNT24 Integration Guide R2 0 10 27 14 www murata com...