Munters comdry m170l, Руководство пользователя

Страница: 8 / 48

ComDry M160L
3 Transport, inspection and storage
3.1 Transport
Before moving the dehumidifier, make sure there is no water left in the drain by pulling the drain plug out.
CA CA CAUTION! UTION! UTION!
Remove the drain pipe from the tray to avoid damage, see section 4.5, Installation of the unit.
Transport the dehumidifier by carrying it by its handle or in the original packaging. The unit must always be
placed in an upright position during transport. Failure to comply with this can cause the unit to malfunction.
The power cord should be rolled up and placed under the handle when carrying the dehumidifier, see
Figure 3.1 .
Figure 3.1 Power cord placement
3.2 Inspection of delivery
1. Inspect the delivery and compare with the delivery note, order confirmation or other delivery
documentation. Make sure that everything is included and nothing is damaged.
2. Contact Munters immediately if the delivery is not complete in order to avoid installation delays.
3. If the unit is to be put into storage prior to installation, see section
Storing the equipment.
4. Remove all packaging material from the unit, and make sure that no damage has occurred during
transportation.
5. Any visible damage must be reported in writing to Munters within 5 days and prior to installation of
the unit.
6. Dispose of the packaging material according to local regulations.
3.3 Storing the equipment
CA CA CAUTION! UTION! UTION!
Always unplug the unit from the power supply when not in use.
Follow these instructions if the dehumidifier is to be stored prior to installation:
■
Place the dehumidifier in an upright position on a horizontal surface.
■
Re-use the packaging material to provide protection for the unit.
■
Protect the dehumidifier from physical damage.
■
Store the dehumidifier under cover and protect it from dust, frost, rain and aggressive contaminants.
5
Transport, inspection and storage
190TEN-1098-D1404