Munters comdry m170l, Руководство пользователя

Страница: 21 / 48

ComDry M160L
6.8 Access the control system
The control system settings and counters are protected against unauthorized change using two access levels.
See also section
6.14, Access levels .
Follow these steps to access the system:
Step Action Result/Illustration
1 To change the settings you must have “one-star” access. Go to menu
Functions, see section 6.7, Navigate the menus .
The menu indicator is flashing.
f
X
2
Scroll up to [ACCESS ] using .
C
f
X
kWh
f
X
A CCES S
3
Press and hold until [ACCESS ] changes to [ACCESS *].
The system is now unlocked,
and it is possible to make new
settings alternatively reset the
counters.
4 A higher, PIN-code protected, “two-star”access level exists. If an attempt
to get higher access is made with the machine switched off, the display will
change to [ 0 0 0 0 ] .
Press four times until [ACCESS *] is visible again.
NOTE!
The system will return to locked mode automatically after five minutes without any activity.
NOTE!
The system always starts in locked mode after power-up (or power failure), regardless of access level
prior to unplugging the unit.
Follow these steps to force the system into locked mode:
Step Action Result/Illustration
1 Make sure the unit is switched off.
2 Go to menu "Functions"
f
X
3 Navigate to [ACCESS *]. See general
instruction in section 6.7, Navigate the menus .
4 Start the unit by pressing On/Off. The green light illuminates
5 Press and hold
until [ACCESS* ] changes to [ACCESS ].
The system is now locked, and it is not possible to make new
settings or to reset the counters.
190TEN-1098-D1404
Operation
18