RPR 750IS Series
9261 - 7912 Issue 8
12
+
Alphanumeric Message Calls
Your pager may receive alphanumeric messages of up to 120
characters in length. When a call is received with an
alphanumeric message attachment, if the total length of the
message plus the stamp (time or message number) is less
than 14 characters, then the whole of the message will be
displayed for the length of the alert period, unless cancelled. If
the alert is cancelled, then the message will be displayed for a
further 2.5 seconds, with the backlight on.
Example of message less than 14 characters in length: -
If a received message is longer than 14 characters, then it is
broken into several segments of up to 14 characters in length.
These segments are then scrolled through automatically
during the alert period, each being displayed for 1.25 seconds
except for the final screen, which is shown for 2.5 seconds.
This process is then repeated until the end of the alert period,
but if the call is cancelled before this time, the message will be
scrolled through again from the beginning and pause on the
final screen.
Example of a message larger than 14 characters: -
If a call is cancelled during the alert period, the MUTE button
may be used to review the message and to speed-up, or slow-
down, the viewing process. If MUTE is pressed and held, the
message is held at the current screen; releasing MUTE
causes the next screen to be displayed. If MUTE is pressed
and released during the final message screen, then the
display will revert to the first part of the message and the
whole message viewing process may be repeated.
M2 ring 398**
13:27 Your
visitor has
arrived in
reception**
+
+
