RPR 750IS Series
9261 - 7912 Issue 8
10
will enter its quiescent mode ready to receive calls, showing
either: -
no time, or time of day
If your pager is programmed with the Permanent ON option,
then the switch-on sequence will be automatically initiated
when a battery is fitted.
4. SWITCHING OFF
To switch your pager OFF, first press and hold the MUTE button
and then press and hold the OCR button. The pager will sequence
to "OFF" and then switch itself off after approximately 2 seconds. If
either, or both, buttons are released and repressed, the timeout
sequence will continue.
If your pager is programmed with the Permanent ON option, then it
can only be switched off by removing the battery.
5. DISPLAY OPTIONS
The Liquid Crystal Display (LCD) is a 14 character full
alphanumeric device, which in the quiescent state is always
active and will show the highest priority status information
(without backlight). Where
time
is enabled as an option, this
will be displayed.
Display reversal
: - The displayed text may be inverted, to suit
your method of wearing the pager. To enable this option from
the quiescent screen, press the OCR button to display the
status prompt
and then press the MUTE button to reverse the
display. The new display direction will be held in the pager's
memory and retained, even when the equipment is switched
off, until you reset it.
6. RECEIVING A CALL
Your pager is capable of receiving tone, alphanumeric and
speech calls. When a call is received, firstly the red ‘alert’ LED
will flash and then an ‘alert tone’ sound. Additionally if the
option is selected, the pager will also vibrate.
-- : --
12:05
