RPR 750IS Series
9261-7912 Issue 8
9
Pager Care
Protect your pager from liquids, extreme temperatures and
strong magnetic fields. Do not leave your pager exposed to
strong sunlight e.g. on a car dashboard, or a window sill. To
clean your pager, use a clean cloth dampened with a little
soapy water. Do not use solvents of any kind!
Wearing Your Pager
Your pager is supplied with a detachable ‘Griptite’ clip, which
is specifically designed to enable a tight grip-fit when used for
‘in-pocket’, or ‘belt’ applications. The tightness of the clip may
be adjusted, by varying the clip slider on the underside of the
clip assembly.
An elasticised detachable Lanyard option with a metal
retaining clip, is also supplied. This may be used in
conjunction with the ‘Griptite’ clip, or as a separate method of
attachment.
2. CONTROLS AND DISPLAY
3. SWITCHING ON
To switch on your pager, press the ON/Cancel/Recall (OCR)
button once. The pager will emit a short beep and enter a self-
test routine, which will activate the LED, message display and
vibrate motor. The pager will then display its address and any
optional switch-on message that has been programmed. At
the end of this sequence, the display will blank and the pager
ON/CANCEL/RECALL
BUTTON (OCR)
ALPHA-NUMERIC MESSAGE DISPLAY
MUTE BUTTON
