RPR 750IS Series
9261-7912 Issue 8
11
This alert sequence may be terminated at any time, by
pressing the CANCEL button.
A message will be displayed for all types of call, the end of
which will be denoted by the ** symbol. Initially any message
is displayed without a backlight, until any button is pressed.
Any messages retrieved from the memory, will also be pre-
fixed by either a ‘time stamp’, or a message number,
depending upon your system (see also Section 7).
Tone Only Calls
When used with Multitone MK6/7 code formats, your pager will
receive up to 8 different tone calls, each with a distinctive
beep alert pattern. For each call received, the pager will
display a tone call number for the duration of the alert. If the
alert is cancelled by pressing the OCR button, then the call
data will be displayed for a further 2.5 seconds.
Example of a tone call with a time stamp; on beep code 3,
received at 12.00 noon: -
+
Example of a tone call with an M (message) number: -
+
12:00 tone
call 3**
M1 tone call
3**
