Multitone RPR 563, Инструкция по изменению

Страница: 55 / 116

A
B
PSG10158-2
RPR 563
TM1195 Issue 1 Page 5 - 5
Figure 1: Belt Clip Removal
DISASSEMBLY
Belt Clip Assembly
7. Referring to Figure 1, apply pressure to the centre of the clip (marked `A') so that its
mounting spring sits proud of its recess, then use a 4mm wide blade (at position `B') to
prise the spring away from the case.
8. To refit the clip, locate the lower end of the clip spring into the corresponding cut-out
in the case, then apply pressure to the centre of the clip, forcing the other end of the
spring into its corresponding recess.
Removing the Antenna
9. To remove the antenna, unscrew it (anti-clockwise) from the case using a 9mm A/F
spanner. Retain the plastic washer.
Decasing the Transceiver
10. To decase the transceiver, refer to Figure 2 and carry out the following procedure:
a) Remove the antenna as detailed in paragraph 9. Note that failure to remove the
antenna prior to disassembly may result in damage to the PCB assembly or
antenna.
b) Remove the battery pack by pressing the battery release button inwards and sliding
the battery pack away from the transceiver.