
Chapter 6 – Managing the RouteFinder Using a Web Browser
Multi-Tech Systems, Inc. RF560VPN User Guide
47
–
Administrative Settings
To access this screen, click the
Administrative Settings
button on the left side of the
Advanced
Settings
screen. Use this screen to change your RF560VPN password, set the HTTP port number,
set remote user configuration, and establish system log settings.
·
Password Settings
To set a new password, type a new one in the
New Password
box and re-type it for verification in
the
Retype Password
box. If you do not want to change any other item on this screen, click the
Submit
button to accept the password change.
Important:
Use a safe password. Your first name spelled backwards is not a sufficiently safe
password. A password such as
xfT35$4
is better.
Caution:
It is important to remember your password. If for any reason you lose or forget your
password, you can press the small reset button on the back of the RF560VPN. However, if you do
this,
all configurations will be reset
, including the password. You will have to reconfigure all of
your RF560VPN settings, but the password is reset to
admin
.
If you are sure you want to reset all the configurations, hold the reset button until the serial LEDs
of the RF560VPN blink, and then release the reset button. This reset action will re-initialize the
settings.
·
System Administration
The
System Administration
function gives remote users the ability to configure and administrate
the RF560VPN through the Internet.
The default IP address of the remote administration host is
0.0.0.0
. This address means that any remote user can access and manage the RF560VPN.
▪
HTTP Port Number:
The default value is 80.
▪
Allow Remote User to Configure the Device Check Box:
To give remote users the
ability to configure and administrate the RF560VPN, you have to check this box.
▪
IP Address:
Type the RF560VPN WAN IP address into the browser of the specific PC on
the network.
http://192.168.100.1:1023
http://<WAN IP Address>: <Port Number>
Important:
Once the HTTP port number
(NOT Port 80)
is changed and the users of the
LAN terminal want to configure the RF560VPN, the users have to type the LAN IP
address with the port number: 192.168.2.3:1023
▪
Ping:
If you want to allow a remote user to
PING
the device, check the corresponding
box. See information about PING in the Appendix.
·
System Log
If you want to enable the system log function, check the corresponding box and enter the
Log
Server IP Address
. This log provides you with a list of all system messages (for example, users
that accesses the Internet).
If you want to enable a
Detail Debug IPSec Log
, check the corresponding box. This option exists
to help you in case there is a problem with the VPN connection.
·
Miscellaneous
Check the
Force to reconnect PPoE
box to force the reconnection of PPPoE if packets cannot
Send/Receive from the PPPoE connection. This ensures that the PPPoE connection is always
there.
Check the
Enable Keep Alive Ping
box if you desire Ping to be kept alive. Enter the address that
should be pinged and enter the time in seconds that pinging should occur.
·
System Parameters
Check the
Enable TCP MTU Adjust Function
box to enable this function. Enter an MTU setting.
This option is to be used with specific applications that require adjusting the packet size.
·
TCP Session
Enter the amount of time in minutes allowed before a Telnet/SSH or TCP session will timeout.
·
UPnP
Check the
Enable UPnP Function
box to enable this function.
Содержание RouteFinder RF560VPN
Страница 1: ...SOHO Internet Security Appliance RF560VPN User Guide ...
Страница 48: ...Chapter 6 Managing the RouteFinder Using a Web Browser Multi Tech Systems Inc RF560VPN User Guide 48 ...
Страница 55: ...Chapter 6 Managing the RouteFinder Using a Web Browser Multi Tech Systems Inc RF560VPN User Guide 55 ...