Multiplex MB-8-1, Руководство техника

Страница: 69 / 178

Part Number STH034 3/12 69
13. Soak the following parts for 20 minutes in
cleaning solution. Rinse the parts thoroughly.


Soak the removed parts in sanitizing solution for
10 minutes and wipe them down.


If solution is left on these parts, they will rust.
•
2 chute parts
• gasket
• dispense wheel and housing
• small washer
14. Wipe the inner ice bin wall with cleaning solution.
Rinse with a clean towel soaked in clean water
and wipe dry. Repeat with sanitizer solution.
Rinse with a clean towel soaked in clean water
and wipe dry.
15. With a bottle brush, brush the ice nozzle at bottom
of ice bin with cleaning solution. Rinse with a
clean towel soaked in clean water and wipe dry.
Repeat with sanitizer solution. Rinse with a clean
towel soaked in clean water and wipe dry.
16. Use an approved Ice Machine cleaning solution
as noted below.
NOTE: For safety and maximum effectiveness, use
the solution immediately after dilution.
Mix 5 fl. oz. (142 ml) “LIME-A-WAY” (Economics
Laboratory, Inc.) with 1 gallon (3 l) of warm water
or follow the dilution instructions and warnings on
an ice machine descaler bottle.