Basic control principles
Switching on the on-board integrated display/controller
5
30283620-02-EN
V3.20151130_rev.2
19
Basic control principles
Switching on the on-board integrated display/controller
You have installed the on-board integrated display/controller. [
1.
- Switch on the on-board integrated display/controller.
⇨
The work screen appears.
Layout of the work screen
The work screen is the part of the screen where you can see the current status of the implement
based on the icons shown. Depending on the implement equipment, not all of the icons are always
shown.
Information on the metering drives
In this area, you can see:
▪
- The seed rate for each connected metering drive. The number
indicates which metering drive is meant. The current value is always shown here.
▪
- The changed target rate you have entered.
Information on the rows
In this area, you can see:
▪ What is being spread in each row:
–
- Seed
▪ Whether a tramline is being created on the right side or the left side of the implement:
–
- The implement is creating a tramline on the side that is marked with this icon.
Information on the additional functions
In this area, you can see if specific functions are activated.
▪
- The waterhole mode is activated.
▪
- The metering cells are being filled with seed.
▪
- Both bout markers are being used.
▪
- The left bout marker is being used.
▪
- The right bout marker is being used.
▪
- No bout marker is being used.
5
5.1
Procedure
5.2
