7
Operating the implement on the field
Using tramline control
26
V3.20151130_rev.2
30283620-02-EN
Areas on the work screen that are relevant for the creation of tramlines
A tramline is being created.
Length of the tramline rhythm
Number of tracks until the tramline rhythm is
repeated.
A tramline is being created on the left side of
the implement.
Number of the current track
Tramline control is not active on this side of
the implement. Therefore, no tramline will be
created for this track. No icon appears.
1.
On the work screen, press:
⇨
You can change the number of the track.
⇨
You can configure the tramline control.
Configuring the tramline control
To configure tramline control, proceed as follows:
1.
Determine the implement type. [
2.
Determining the machine type
If you are working with a seeder with tramline control, you have to know where and how many
tramline mechanisms are installed on your seeder. The following overview shows how tramline
mechanisms can be installed on your seeder.
▪ One tramline mechanism on each side of the seeder.
Procedure
7.7.1
Procedure
7.7.2
