MTU 12 V 2000 G25 Скачать руководство пользователя страница 134

Страница: 134 / 155

7.21 Accessories for (Electronic) Engine Governor / Control System

7.21.1 Engine governor and connectors – Cleaning

Preconditions

☑

Engine is stopped and starting disabled.

Special tools, Material, Spare parts

Designation / Use

Part No.

Qty.

Isopropyl alcohol

X00058037

Note:

Always use test connectors to enter the connectors. Never use test leads for this purpose. Otherwise
the contacts could be bent.

Engine governor and connectors – Cleaning

Remove coarse dirt from housing surface using a cloth moistened with isopropyl alcohol.

Remove dirt from the connector and cable surfaces with isopropyl alcohol.

Check legibility of cable labels. Clean or replace illegible labels.

Cleaning severely contaminated connectors on the engine governor

Note:

Seal unused connectors with the supplied protective cap.

Release the latch and pull off connectors.

Clean connector housings, connector socket housings and all contacts with isopropyl alcohol.

When connectors, sockets and all contacts are dry: Fit connectors and lock them.

134 | Task Description | MS15018/02E 2013-09

TIM-ID: 0000000047 - 010

Содержание 12 V 2000 G25




























































































































































Результаты поиска

Содержание 12 V 2000 G25

Отзывы:

Похожие инструкции для 12 V 2000 G25

Бренды по названию

Популярные бренды

MTU 12 V 2000 G25, Руководство по эксплуатации

Результаты поиска

Содержание 12 V 2000 G25

Отзывы:

Похожие инструкции для 12 V 2000 G25

Бренды по названию

Популярные бренды